Adding new and sufficient insulation to a home, regardless of whether it’s old or new construction, can significantly improve the comfort level of the home, in addition to drastically reducing your energy bills. Your home should be properly insulated from the roof all the way to the foundation to ensure the maximum amount of energy efficiency. Usually, insulating the attic, walls and flooring are the best way to keep the warm air trapped in your home and the cold air outside where it belongs. Even if you already knew this, you may be questioning why these areas are especially important when it comes to insulation in Petaluma, CA.

Here’s why you’ll always want to keep your attic, walls and floors adequately insulated, regardless of the season.

Attic

The attic should always be the top concern when it comes to insulation. This space between your roof and your home is often one of the most vulnerable points where valuable heat can escape outside. In addition, the outside air can also seep in through the attic, which subsequently cools the rest of your home from the top down. Most professional insulation specialists will recommend installing quality loose fill or batt insulation to keep the air from escaping. Loose fill is the cheaper option, but it is much less effective if it is not properly installed by a professional.

Wall

The exterior walls of your home are the main barriers between the inside and outside of your home. During the cold winter months, heat can seep out through the walls to the outdoors, which means your heater will be working overtime to maintain a consistent temperature within your home. Not only will this drive up energy costs, but it will also put unnecessary strain on your heater, which can lead to expensive repairs. Properly insulated walls will help prevent the cycle of heat gain and loss. Options such as batt and spray foam insulation tend to be the best choices for walls. This insulation project tends to be the most costly and shouldn’t be attempted by anyone other than a professional with experience in installing insulation in Petaluma, CA.

Floors

Typically, most homeowners do not heat their garages or crawl spaces. But that doesn’t mean these areas can go without adequate insulation. In fact, these two areas are easy access points for cold air to enter into your home unnoticed. Installing spray foam insulation will keep the cold air from rising up through the floor and into your home. Not only will this help keep energy costs low, but proper flooring insulation will also reduce the likelihood of moisture, insect infestation and mold problems.

With winter on its way, ensuring that these three areas are properly insulated is the most important thing a homeowner can do to reduce energy costs and increase the overall comfort level. Ace Insulation Inc. is here to help prepare your home for winter through a variety of services, including spray foam insulation installation. Call us today to find out more about how new insulation can benefit you.

As California residents, we’re lucky because much of our state doesn’t have to deal with icy roads or big snow falls. But that doesn’t mean Californians are safe from winter. Much like notoriously cold states, the cost of the heating bill still increases as the outside temperatures get lower. Many families rely on cranking up their thermostat to high temperatures in order to keep their homes warm.

Unfortunately, the temperature doesn’t matter if you do not have proper insulation in Petaluma, CA. Usually, insulation works to trap the heat within your home, but that warmth can easily escape through small openings and walls if your home is lacking this vital barrier. Installing or checking to ensure your insulation is up to snuff will not only keep your home warm all winter long, but also help keep your electricity bill lower throughout the entire season.

Here are three ways you can get a head start on preparing your home for winter when it comes to insulation in Petaluma, CA.

Check the current insulation

Fall is the perfect time to check throughout your home for any potential problem areas. Take a look in your attic to determine if there are any bare or compromised spots that could use the help of insulation if they don’t already have it. This is especially important because insulation is the best barrier for keeping the warm air within your house, while also preventing the cold air from seeping in. Running the heater is fruitless without adequate insulation!

Seal off vulnerable points with insulation

Air drafts, small openings and leaks within your home easily allow the warm air to escape. This means your heater will then have to work twice as hard to maintain a warm temperature in your home. The easiest way to prevent this from happening is to carefully examine possibly vulnerable points within your home for any air leaks. Once you find them, seal them off with spray foam insulation. Pay special attention to the openings around the windows and doors, because these tend to be the most common areas for the warm air to leak out.

Prepare your home for winter now!

The simplest way to ensure your home is ready for winter is to start preparing the insulation in your home immediately! As previously noted, insulation is your first line of defense when keeping the warm air inside and the cold air outside. Have a professional insulation specialist from Ace Insulation Inc. visit your home to check that every opening is properly sealed with a high quality and durable insulation material, such as spray foam insulation. Having this check early before the weather reaches freezing will keep your family warm and your utility bills low.

Taking care of any issues in advance will leave plenty of time for everything to be resolved at a non-emergency pace and, as a result, a lower cost. Call Ace Insulation Inc. today to schedule your annual insulation check. We look forward to helping you and your family stay warm and comfortable this winter!

With cooler weather just around the corner, now is a great time to make sure your home insulation in Petaluma, CA is up to the task of keeping your family protected from the elements. If you’re building a new home, renovating or redoing the insulation, one great option you might want to consider is “drill and fill.”

Below, we’ll take a look at this type of insulation and explain how to use it in your home. And remember, it’s always a good idea to call your trusted insulation company with any questions or installation help.

What is drill and fill?

Drill and fill is the process of drilling holes through your walls, and then blowing cellulose insulation into those halls to fill the empty spaces behind.

How can it help me?

If you took away the drywall of your home and looked behind, you’d see that there are gaps and cavities. This is because of the way the house is constructed, and it’s natural to have some spaces like this. However, it is not a great idea to leave a large space un-insulated, as this can let in heat and cold air all year, spiking your utility bill and worse. When an experienced insulation company uses the drill and fill method to insulate your home, you will notice it is much easier to moderate temperature and retain heat and cool air.

How do I install it?

First, you’ll need to move all the furniture out of the area. Then, lay down drop cloths; these will capture the dust created when you drill through sheetrock. Now you’re ready for the next step: locating the studs behind your walls. You can use a battery-powered stud finder, available at your local hardware store, to speed up this process. Grab your pencil and mark the drill targets in between the studs.

Next, get your power drill and attach a four-inch hole saw to the end. Drill slowly and cautiously—you don’t want to hit a stud. You might want to wear a dust mask to avoid inhaling dust and debris particles.

Now it’s time to get started on the insulation. You’ll need to use an insulation blowing machine, which will come with a long attachment that you will insert into each hole. Find a stick that you can use to press any loose insulation down as you go along. Fill each hole with the cellulose insulation.

The last step is repair. Get some mudding to fill the holds, let it dry and then sand it so it’s smooth and flat against the rest of the wall surface. You’ll probably need to install a backstop, as well, so the mudding is secured. Then grab a paintbrush, paint everything over and enjoy your newly insulated walls!

With projects like this, it’s sometimes best to call in a respected company to help with your home insulation in Petaluma, CA. Ace Insulation Inc. is here if you need us—just give us a call or stop by anytime.

Home insulation is often included on the list of home improvements that people want to make. Many of the people who decide to get their home insulated make this decision because they want to avoid wasting their heat and have grown tired of paying a high energy bill every month. While this is a great reason to get your home insulated, people should also consider how insulation might add to their comfort level.

Here are four ways home insulation in Petaluma CA can increase your comfort:

  • Reduces noise: Outside noises and even sounds from appliances and other items in your home can be extremely annoying when you need your home to be quiet. With insulation being able to absorb sound and reduce how much noise you are able to hear while you are in your home, it can change how comfortable you feel. Prior to getting insulation, you may feel as though you can’t hear yourself think and it’s impossible to get any peace and quiet, but afterwards, you should be able to get those quiet nights you have been missing.
  • Improves air quality: Everyone should be able to live in a home that has clean air. Unfortunately, poor insulation can lead to the air in your home being polluted with dust, pollen and insects. This will decrease the quality of air in your home and may even cause problems with breathing and overall comfort. When you get your home insulated, the insulation aids in improving the quality of air in your home and allowing everyone to breathe easy.
  • Keeps you warm and cool: There are many ways for people to determine if they need their home insulated, and how warm you feel in your home is one of them. During the colder months, a lack of insulation will allow heat to escape, leaving you cold and paying a higher energy bill. With proper insulation, your home will be warmer, which means you will be warmer and more comfortable. It is the same when people are looking to stay cool in their home during the warm, summer months, when insulation keeps cooler air in the home.
  • Improves control of humidity: Another sign of poor insulation is a lack of control of humidity. A humid home is one that can be filled with mold and ultimately cause you and your family to have runny, watery eyes, a runny nose and many other symptoms associated with allergies. This will cause people to experience discomfort and not want to be in their home. By adding insulation, you can better control the humidity in your home and hopefully reduce these symptoms.

Not everyone may realize that some of the discomfort they are experiencing in their home is due to the poor quality of their insulation. As time goes on, poor insulation will only continue to decrease the level of comfort a person feels in their home. Everyone deserves to feel comfortable in their own home, and if insulation can help achieve that goal, it will be worth getting.

Interested in home insulation in Petaluma, CA? Contact Ace Insulation Inc. today to speak to a professional.

When people decide to make changes or improvements to their home, it is not a decision that they should make hastily. Oftentimes, these home improvement projects are rather large, can take quite some time to complete and may cost thousands of dollars. With many looking to make the smartest decision for themselves and their home, before people move forward, they will want to look at a number of factors. For example, homeowners who are considering insulation in Petaluma, CA should think about the following:

  • Whether insulation is necessary: There are a lot of home improvement tasks that people decide to start even though things don’t actually need to be improved. Just because you are considering having your home insulated doesn’t actually mean it needs to be done. To help you determine if insulation is necessary, you can look for certain signs. For example, cold floors and a high energy bill are both signs that your home needs to be better insulated. If possible, you can call in a professional to give you their opinion and help you decide.
  • Timing: Timing is very important when you are planning to do any type of home improvement project. Insulation can pretty much be done at any time of year, but if you are insulating to keep warm during the winter, you’ll want to get things done prior to the start of the colder months. In many cases, if a person has other home improvement projects going on, it would be ideal to insulate during this time, so you don’t feel put out of your home for longer than necessary.
  • Cost: Insulating your home is not something that you can do for a few dollars. Cost will play a major role in whether or not you insulate your home, so you will want to look at how much you are willing to spend and what company can get the job done for a price within their budget. It may be a pain to shop around and get estimates, but it will be worth it if you find a company that can give you what you want for a price you are willing to pay.
  • Type of insulation: Once you decide to insulate your home, you will need to choose which type of insulation you would like. With there being different types of insulation and a number of benefits to choosing one over the other, homeowners should look at every type of insulation that is offered by the company that they choose to work with. This is especially important if people are looking to avoid things like a high energy bill every month.

Although many people do not realize it, there are a lot of homes around the United States that are not well insulated. As a result, the people living in these home suffer in more ways than one. Whether you want to keep warm in your home during the winter or avoid paying a high energy bill, insulating your home is a wise decision.

Anyone considering installing new residential insulation in Petaluma, CA should contact Ace Insulation Inc. to schedule an appointment.

Areas Served

Proudly providing residential and commercial insulation installation to Petaluma, CA and the surrounding areas including:

  • Rohnert Park, CA
  • Novato, CA
  • Roseland, CA
  • Santa Rosa, CA
  • San Anselmo, CA
  • San Rafael, CA
  • Napa, CA
  • American Canyon, CA
  • Larkspur, CA
  • Corte Madera, CA
  • Vallejo, CA
  • Mill Valley, CA
  • Windsor, CA
  • Lake Tahoe
  • Truckee, CA
  • Willits, CA
  • Healdsburg, CA
  • Geyserville, CA

Certifications

Certificate of Approved Applicator from SWD, approved to install quik-shield polyurethane foam and coating products in residential and commercial applications according to the standards and guidelines as set forth by SWD Urethane

Home InsulationHome Insulation

Contact Us Call Today